Design Process for The Yeti - MULTIPLANES

Behind the scenes of my first Multiplanes, The Yeti. Developed Q1 2016. Here are some photos and thoughts of the process I go through while designing in general; also specifically for the Yeti. 

PROTOTYPE 1: When designing, my first idea is often garbage. The point is to get the idea out into the physical world. Refinement comes much later.

Yeti - Prototype 1.jpg

PROOF OF CONCEPT: Here’s where I make a super crude first pass on the Yeti Multiplane. This is where I hold the product and take in this concept and let it speak to me. If it works on a very basic conceptual level, I go forward with it and devote hours to fleshing out as many revisions on the Yeti until it grabs me on some emotional level.

Yeti - Prototype 1 Print.jpg

FINAL YETI DESIGN: Once the main character is strong enough to add sufficient drama to the scene, I go in and spend lots of time developing the scene. I also spend time at shops obsessing over paper, colors and other materials that can add to the scene. 

Yeti Solo.jpg

YETI FLAT ART: In this step, I proceed to further refine and cut out art from my vector designs. Anything can change at this point but it’s pretty close to finished.

Yeti Flat Art.jpg

FINISHED PRODUCT: Once the final version is set I create and assemble a finished product and look it over for a few days to see how I feel about it. If I’m still thrilled in the end, it goes to final production and into your hands!!! With the Yeti, I also added a frosted acrylic layer to simulate snow, real wood for the foreground trees and added an LED lighting system to pull it all together. Also speaking on the final scene, I felt it was just right when I saw those poor hikers off in the distance. They’re completely unaware that either they’re about to be disemboweled or sent off into the ether. Who knows. 😱
For all of you that have been asking, MULTIPLANES will be available online at for the first time in December!!!

The Yeti Design.jpg

VINYLSMACK will be at Designercon November 19-20 in Pasadena, Ca!


Mark your calendars. VINYLSMACK will be at Designer Con this November 19-20 at the Pasadena Convention Center. After our first appearance at DCON last year, we have since been hard at work with an amazing new product line that will make its debut at DCON 2016! Stop by and visit us in booth #1706 which is located in Hall C.

About DesignerCon:  Designer Con is an annual art and design convention that smashes together collectible toys and designer apparel with urban, underground and pop art!

There is so much in the works from here till then so stay posted and make sure to stop by our booth for more Marvelous Multilayer Creations. Sign up for our newsletter for more info and subscriber only specials that are soon to come. If you’re a fan, show some love and get the word out.

Something Wicked This Way Comes

Project 43.

Project 43.

It's been a while since we last updated. Rest and a hard reset were needed! Our last big push was for our public debut at #designercon which was the highlight of the year. Since then, the VINYLSMACK team has been plugging away at some amazing new products that we can't wait to release. Currently under wraps, were calling this Project 43. The first iteration of this new art will take you deep down the rabbit hole and into the world of the mysterious. Cryptids will be among the first to greet you later this year. Do stay posted! #cryptid #cryptozoology#mysterious #vinylsmack #papercraft#design #art #project43 #myth #legend

New Rod Serling Inspired Buttons Available for *Free!

"That's not fair. That's not fair at all. There was time now. There was all the time I wanted. That's not fair!" 

Man, that point in the Bemis episode gets me every time.

New to VINYLSMACK, our Rod Serling/Bemis illustration is now home to some swell 2.5" buttons. They're available for $3 or come free with a purchase of either of our "3 Rods" die-cut sticker sets. Pick one up today and show your love for Twilight Zone, Rod Serling, Henry Bemis, and VINYLSMACK!

Vinylsmack is now at Big Kid Collectable Toy Mall & Retro Store!

Our Rod Serling/Twilight Zone inspired die cut sticker sets are now available at my favorite retro toy store, Big Kid Collectable Toy Mall & Retro Store! If you're in the Sherman Oaks/Van Nuys area, you have to make it out to this shop. They have tons of hard to find old toys and new retro stuff as well. Dave and all the employees are just awesome!

Big Kid Collectable Toy Mall is located at: 14109 Burbank Blvd, Sherman Oaks, Ca 91401

Dave Levy of Big Kid Collectable Toy Mall

Dave Levy of Big Kid Collectable Toy Mall

Rod Serling.jpg
Rod Serling
Toy Store

100 Followers on Instagram

100 Strong!

100 Strong!

I didn't notice getting my 1st 100+ followers till today. Thanks to all my customers and new followers for coming along. This was one of my first goals/milestones. 100 might seem like a small number but to me it's 100 people that have chosen to follow my art and design. It's the start to something much bigger. There's so much wicked stuff in the works for VINYLSMACK. Stay posted, follow and share. A million thanks!👌

Follow us:

The Twilight Zone Inspired Die Cut Stickers...Rod Leads the Way!

My latest product from features The Twilight Zone’s Rod Serling. I got this idea a while back. Here’s some of the back story for the inspiration:

I’ve always been a fan of the Twilight Zone and would watch it all day whenever one of the marathons came on. If I remember correctly, they aired on Thanksgiving and on the fourth of July. As a younger kid, I’d watch it from a safe and curious distance. I knew that some of them were creepy so hence the need for a safe distance. As I got older though, I loved some of the weighty topics that Rod Serling would tackle on the show. Many have written on the topic of Rod Serling and how he dealt with social and philosophical issues so I won’t belabor that here. There was something about that feeling after most episodes where I felt I was taken through a nightmare and left unscathed. I learned a lesson of sort through the subject matter. And how could you not love Rod appearing on those intros and outros of the show. He was like a Willy Wonka, taking us through his factory from another dimension. I wish he could’ve done more. 156 episodes weren’t enough!

Now back to the 3 illustrations I designed. Since Rod Serling was such a prolific writer and steered his vision of what the show was, I thought it would be awesome to feature a version of Rod in every illustration; with a twist of course like every episode.

The first I developed is Rod Serling as himself. This first design came from a sketch I did a while back of Rod Serling with very large, black, zombie-like eyes. I did this because of the creep factor of the show at times. I kept it simple and added those Twilight Zone swirls from the show’s intro.

The next design I tackled was inspired by one of my personal favorites, “Time Enough at Last” which starred Burgess Meredith. For this, there’s a few things going on. First, I wanted it to look like Rod but also like “Henry Bemis,” the episode’s main character. Early on I decided that the characters should have Rod’s facial characteristics and have other external elements that make up the actor he’s “portraying. For the Bemis illustration, he’s all Bemis but still Rod under the glasses, crazy hair, and mustache. I also implemented his love of books into his suit, an element most fans would get!

The third design is taken from “The Nick of Time.” For this, instead of having Rod illustrated as William Shatner’s character, I made him the more obvious choice, the mystic from the diner table. He has Rod’s features but shares most of the features from the show version. For the box itself, I brought in elements from his suit to wrap around the box. Instead of copying the words from the box, I thought it fitting to use a portion of Rod’s words at the closing of the show, “Counterbalance in the little town of Ridgeview, Ohio. Two people permanently enslaved by the tyranny of fear and superstitution, facing the future with a kind of helpless dread. Two others facing the future with confidence – having escaped one of the darker places of the Twilight Zone.”

Once I finished designing the 3 illustrations for the die-cut sticker set, I went on to develop the a special edition package that features an envelope in the shape of a TV set complete with a stand on the back. Everything I design at VINYLSMACK has some handmade elements. The set is made of die-cut card stock and a plastic window. I hope you enjoy them. They’re now available for purchase over at: